the deck of your house may seem like an easy task, but in truth, this type of job is usually better left to the professionals, especially if you will be doing it manually without any cleaning equipment. However, if you have a pressure washer, you may want to take up the cleaning task yourself as it will give you the satisfaction of being able to do it yourself. Pressure washing monroe nj
The first thing you need to do when cleaning the deck of your home is to prepare it for pressure washing. A well-prepared deck will look great once it has been fully cleaned. The wood on your deck should be sealed appropriately. If it has an old sealer, this should be peeled off first before a new sealer is applied. Having a properly sealed deck will have the advantage of not having to do annual deck cleaning. A good way of checking if a stripper is not required is by sprinkling a few drops of water on the wood. If the wood gets soaked up, then a strip is not required. However, if it does not soak up, then you may require some stripper
When cleaning the deck using a pressure washer, it is recommended not to use too much pressure as having a very high pressure of water could potentially damage the wood. Using approximately 300 to 1000 PSI is recommended for cleaning a wooden deck to ensure that you do not create any damage on the wood. If there are any stains or tough to remove dirt on the wood, it is recommended to use a chemical cleanser which could then be rinsed off by the pressure washer. It is important to remember however that when using deck cleaning chemicals and strippers, to never leave them on the wood for longer periods as this may develop into fuzziness.